home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ShareWare OnLine 2
/
ShareWare OnLine Volume 2 (CMS Software)(1993).iso
/
comm2
/
ransi_3.zip
/
RANSI-3.TXT
< prev
next >
Wrap
Text File
|
1993-01-30
|
8KB
|
235 lines
▄▀▀ ▄▀▀ ▄▀▀ ▀▀█▀ ▀█▀ ▄▀▀▄ █▀▄ █ ▄▀█
▀▄ ▄▀ █ █ █ █ █ █ █ █ █
▀▀ ▀▀ ▀▀ ▀ ▀▀▀ ▀▀ ▀ ▀ █
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀▀▀▀
Ransi Version 3.01
Created on January 29,1993
///egabyte Software
Copyright (c) 1992,93
INTRODUCTION
I was working on this program one day and i thought it was useless
untill i told someone about it and he thought it was a good idea so i
decided to run it. The first 2 version were real chunky and had some
errors so i decided to rewrite the entire program. And here it is!
WHATS NEW IN VERSION 3.01
Additional Add-ons
ANSI SHOW VERSION 2.01 is included in the Ransi program now as a
freebee to REGISTERED users. This program is like a ansi shower which
can be pretty usefull for local and remote use. All it does is show a
list of Ansi files ( You create the list in the config program or a
text editor ) and you can select them. CHECK SECTION 2 in this document
on this program.
REGISTERED VERSION 2.0 is included in this program now as well
as a freebee to Registered users. If you bbs charges a fee to users
you can run this as a door to show users who is registered to your
bbs. CHECK SECTION 2 in this Document on this program.
RANSI'S New options:
Parameters LIKE :
For Dates only /D
For Ansi Show only /A
For REGISTER only /R
Totally Redone Config Program
Totally Redone Ransi Program
RANSI 3.01 REQUIREMENTS
Ransi Version 3.01 Requires the following to run on your Bulletin
Board System:
Version 2.25 and up of Searchlight Software
A copy of BRUN30.EXE (Included with this program)
At least 5 ansi Screens
INSTALLING RANSI 3.01 IN SEARCHLIGHT
To install Ransi Version 3.01 in Searchlight in a STARTUP menu:
1. Command Name ...................... RANSI
2. Command Key ....................... R
3. Description ....................... Ransi Login door
4. Minimum Access Level .............. 0
5. Maximum Access Level .............. 255
6. Required Attributes ...............
7. Exclude Attributes ................
8. Preference Attributes .............
9. Help Levels ....................... All
10. Door Command ...................... RANSI-3.EXE
11. Dirtectory Path ................... i.e: C:\SLBBS\RANSI
12. Communications Support ............ Force-Color
13. Abort Method ...................... Reboot
14. Write Protection .................. No
15. Parameter File .................... None
16. Pause After Door .................. No
This is what it should look like but options 6,7,8,11 can be changed
to your likeings.
To install Ransi as a Auto Login door do:
1. Command ........................... RANSI-3.EXE
2. Directory Path .................... i.e: C:\SLBBS\RANSI
3. Communications Support ............ Force-Color
4. Abort Method ...................... Reboot
5. Write Protection .................. None
This is what it should look like but option 2 can be changed to your
Likeing.
*** YOU MUST RUN THE RANSI CONFIG PROGRAM TO MAKE RANSI RUN
OR IT WILL NOT WORK. THE CONFIG PROGRAM IS TOTALLY RE
CREATED AND IS NICE!!! IT TELLS YOU -=EVERYTHING=- ***
Note: These Options are only Available in the Registered Version Only
Ansi Show Verison 2:
Searchlight Configuration:
In your Doors menu ADD (F1):
Command Type: Door
Then:
1. Command Name ............... Ansi Show
2. Command Key ................ A
3. Description ................ Ansi Viewer
4. Minimum Access Level ....... 0
5. Maximum Access Level ....... 255
6. Required Attributes ........
7. Exclude Attributes .........
8. Preference Attributes ......
9. Help Levels ................ All
10. Door Command ............... RANSI-3.EXE /A
11. Directory Path ............. C:\SLBBS\RANSI
12. Communications Support ..... Force-Color
13. Abort Method ............... Reboot
14. Write Protection ........... None
15. Parameter File ............. None
16. Pause After Door ........... No
This is what it Should Look like but options 2,3,4,5,6,7
8,9,*11* Can Be changed.
Register Verison 2:
Searchlight Configuration:
In your Doors menu ADD (F1):
Command Type: Door
Then:
1. Command Name ............... Register
2. Command Key ................ A
3. Description ................ Displays Registered Users
4. Minimum Access Level ....... 0
5. Maximum Access Level ....... 255
6. Required Attributes ........
7. Exclude Attributes .........
8. Preference Attributes ......
9. Help Levels ................ All
10. Door Command ............... RANSI-3.EXE /R
11. Directory Path ............. C:\SLBBS\RANSI
12. Communications Support ..... Force-Color
13. Abort Method ............... Reboot
14. Write Protection ........... None
15. Parameter File ............. None
16. Pause After Door ........... Yes
This is what it Should Look like but options 2,3,4,5,6,7
8,9,*11* Can Be changed.
That is it. To configure these programs run CONFIG-3.EXE under option
6 for Ansi Show and option 7 for Registered.
Registration Fee
To register Ransi it costs 15.00 Dollers. After Registering Ransi
You have have free updates to this program and get a Registration Code.
When you get the code you just run the configuration program and type it
in. Then you have access to all the options in this program.
Send Money to:
Jimmy Thompson
26 Bell Cresent
Y1A-4T4
Whitehorse, Yukon
Canada
And Call Sirius Bulletin Board System at: 1-403-668-3223 and check it
out! It runs on a 386-DX with a 14.4K modem and a CD-ROM with 30,000 Files
! So call today the Sysop would like to here about your Views on it. And
Know your Bulletin Board Name and Phone number so can i call your bbs!
Thanks for using Ransi !